  |
|
|
|
|
|
|
Last Update - Feb, 2010
Prices may change without notice and may vary depending on availability.
All prices are in Australian
Dollars - No GST on orders outside Australia
Click
here to download a order form
| Fan Ducts | Inc GST | Ex GST | |
| 96 - 09 Viper Cruiser, Viper 4, 4X and 4X rescue |
 |
$1,155.00 | $1,050.00 |
| 09 Viper 5, 5X and 5X rescue | $1,375.00 | $1,250.00 | |
| Spinners | Inc GST | Ex GST | |
| Rear Spinner to suits most Vipers |
 |
$132.00 | $120.00 |
| Rudder & Elevator: | Inc GST | Ex GST | |
| Rudder assembly complete suits Viper 4 and cruiser series |
 |
$638.00 | $580.00 |
| Rudder assembly complete suits Viper 5 series | $671.00 | $610.00 | |
| Elevator assembly complete suits Viper 4 and cruiser series | $1,078.00 | $980.00 | |
| Elevator assembly complete suits Viper 5.series | $1,111.00 | $1,010.00 | |
| Fan guards | Inc GST | Ex GST | |
| Fan Guard (includes 6 x fittings) suits most Vipers | $198.00 | $180.00 | |
| Fan hubs | Inc GST | Ex GST | |
| Type Z 9 blade hub (to suit Viper hub) |
 |
$159.50 | $ 145.00 |
| Type Z 8 blade hub (to suit Viper hub) |
 |
$198.00 | $ 180.00 |
| Machining to suit other hubs. |
 |
$ 44.00 | $ 40.00 |
| Fan blades (suits all Viper range) | Inc GST | Ex GST | |
| 5ZL (PAG) |
 |
$ 38.50 | $ 35.00 |
| Z Pitch setting pin | $ .33 | $ 0.30 | |
| Drive components | Inc GST | Ex GST | |
| "Flex hub" axle/hub assembly & pulley. Cruiser, Viper 4 & 4T (all pre 09 4X, 4XR and Rescue) | $1,320.00 | $1,200.00 | |
| Top Drive pulley. 08 - 09 Viper 4, 4X, 4XR & Rescue. 09 - Viper 5, 5X and Rescue |
 |
$374.00 | $340.00 |
| Top Drive pulley. All Pre 08 Flex hub type. Replaced by Viper 5 pulley/hub above |
 |
||
| Bottom Drive pulley Cruiser, Viper 4 & 4T.(Rotax and Hirth) |
 |
$198.00 | $180.00 |
| Bottom Drive pulley Viper 4X, 4XT, 4XR and Rescue (Hirth F30U) | $231.00 | $210.00 | |
| Bottom Drive pulley Viper 5, 5X, and Rescue (582 & 3701) |
 |
$220.00 | $200.00 |
| Drive belts. Cruiser and Viper 4 & 4T - Viper 5, 5X & Rescue GT2 Gates |
 |
$143.00 | $130.00 |
| Drive belts. Viper 4X, 4XR & Rescue (all F30 Hirth) | $242.00 | $220.00 | |
| Engine frames and mounts | Inc GST | Ex GST | |
| Engine frame - Cruiser and Viper 4, 4T & 5 | $682.00 | $620.00 | |
| Engine frame - Viper 4X, 4XR and rescue | $748.00 | $680.00 | |
| HOT DIP Gal Coating | $110.00 | $100.00 | |
| Engine mount set. Rubber mounts and fasteners. Suits most Vipers. | $121.00 | $110.00 | |
| Rubber engine mount (40 x 40 x M10 x Type 13 - Aircraft grade) |
 |
$ 22.00 | $20.00 |
| Rubber duct mount (40 x 40 x M10 x Type 11 - Aircraft grade) |
|
$ 22.00 | $20.00 |
| Assorted engine parts | Inc GST | Ex GST | |
| Mikuni fuel pumps - dual outlet |
 |
$66.00 | $ 60.00 |
| Radiator hose elbow (Viper 4T & 5) | $ 38.50 | $ 35.00 | |
| Radiator adaptors (top and bottom to suit Viper 4T & 5) | $198.00 | $180.00 | |
| Air Filter Cover, Carbon fibre (Open) - suits most two strokes | $27.50 | $25.00 | |
| Air Filter Cover, Enclosed, Still air type complete - suits Twins e.g. 582 |
 |
$154.00 | $140.00 |
| Air Filter Cover, Enclosed, Still air type complete - suits Triples e.g. 3701 | $165.00 | $150.00 | |
| Fuel system | Inc GST | Ex GST | |
| Fuel tank. Fibreglass. 30lt. Cruiser & Viper 4 range with fittings. |
 |
$300.00 | $330.00 |
| Fuel Tank. Alloy. Viper 4X range (some Viper 4s). 40 Ltr. With fittings. |
 |
$385.00 | $350.00 |
| Fuel Tank. Alloy. Viper 5 range. 50 Ltr. With fittings. | $400.00 | $440.00 | |
| Primer bulb | $16.50 | $15.00 | |
| Fuel Line | $ 6.05 per mtr | $ 5.50per mtr | |
| Fuel line/primer bulb (universal) |
 |
$17.60 | $16.00 |
| Fuel filter (specify model) | $ 6.60 | $ 6.00 | |
| Fuel Tank Breather. 1/2" fitting. |
 |
$16.50 | $15.00 |
| Tank Pick-up/filter (universal) | $16.50 | $15.00 | |
| Throttle gear | Inc GST | Ex GST | |
| Twist throttle assembly and grips | $71.50 | $65.00 | |
| Outer throttle & choke cable |
 |
$5.50 p/m | $5.00 p/m |
| Inner throttle & choke cable |
 |
$6.60 | $6.00 p/m |
| Ferrel |
 |
$0.55 | $0.50 each |
| Barrel |
 |
$0.55 | $0.50 each |
| Nipple |
 |
$0.55 | $0.50 each |
| Steering and elevator parts | Inc GST | Ex GST | |
| Steering cable. Cruiser, Viper 4, 4X, 4XR and Rescue |
 |
$104.50 | $ 95.00 |
| Steering cable. Viper 5, 5X, 5XT and Rescue |
|
$110.00 | $ 100.00 |
| Elevator cable. Cruiser, Viper 4, 4X, 4XR and Rescue |
 |
$178.20 | $162.00 |
| Elevator cable. Viper 5, 5X, 5XT and Rescue |
|
$182.00 | $170.00 |
| Assorted fittings | |||
| Ball Joint (6mm S/S stud) |
 |
$28.38 | $25.80 |
| Handle bars - alloy |
 |
$22.00 | $20.00 |
| Handle bar foam |
 |
$11.00 p/m | $10.00 p/m |
| Goose Neck - alloy |
 |
$22.00 | $20.00 |
| Steering shaft & cog. Stainless steel | $104.50 | $95.00 | |
| Steering bush |
 |
$11.00 | $10.00 |
| Skirt system | Inc GST | Ex GST | |
| Viper Cruiser front-side/rear | $20.90 / $24.20 | $19.00 / $22.00 | |
| Viper 4, 4X, 4XR & Rescue) - front-side/rear |
 |
$23.10 / $26.40 | $21.00 / $24.00 |
| Viper 5, 5X, 5XR & Rescue) - front-side/rear | $25.30 / $28.60 | $23.00 / $26.00 | |
| Full sets - to suit Viper - from |
 |
$ask | $ask |
| Skirt Material - Polyurethane coated nylon (1.5m wide - 0.25mm thick) Black |
 |
$34.65 per l/m | $31.50 per m |
| Skirt Material - Polyurethane coated nylon (1.5m wide - 0.35mm thick) |
 |
$46.20 per l/m | $42.00 per m |
| Skirt Material - Neoprene coated nylon (1.5m wide - 0.33mm thick) Limited stock |
 |
$30.80 per l/m | $28.00 per m |
| Skirt batten (1) |
 |
$ 2.75 | $2.50 |
| Skirt batten material per mtr | $ 11.00 | $10.00 | |
| Skirt screws - Pack of 100 | $ 20.90 | $19.00 | |
| Cable ties - Pack of 100 |
 |
$ 18.70 | $17.00 |
| SDS panel and mounting plates (suits all Vipers) |
 |
$198.00 | $180.00 |
| Electrical | Inc GST | Ex GST | |
| Tachometer 0 - 7000 rpm |
 |
$154.00 | $140.00 |
| Fuel Gauge inc sender |
 |
$104.50 | $ 95.00 |
| Engine Hour meter |
 |
$ 88.00 | $ 80.00 |
| Voltmeter 8 to 18 V |
 |
$ 49.50 | $ 45.00 |
| Water Temp gauge plus sender. 120F to 240F |
 |
$ 71.50 | $ 65.00 |
| CHT Gauge plus sender (single) |
 |
$ 88.00 | $ 80.00 |
| Bilge pump. 500 gph. |
 |
$ 36.30 | $ 33.00 |
| Bilge pump. Auto 500 gph. |
 |
$ 121.00 | $ 110.00 |
| Spiral Hose. Suits 500 gph manual and auto bilge pump. |
 |
$ 9.35 per mtr | $ 8.50 per mtr. |
| Kill Switch assembly |
 |
$ 16.50 | $ 15.00 |
| Waterproof Toggle Switch |
 |
$ 8.25 | $ 7.50 |
| 3 Position Key Switch assembly (suits all Vipers) |
 |
$ 77.00 | $ 70.00 |
| Fuse holder - Waterproof |
 |
$ 9.35 | $ 8.50 |
| Strobe
light - Orange. Water proof - Vibration proof - Ideal for hovercraft use. Made specifically
for Viper Hovercraft. - 12V - Single flash - 60mm lens. 70mm H. 120mm base |
 |
$ 71.50 | $ 65.00 |
| Strobe
light - Orange - Water proof - Non vibration areas only - 12V - Single flash - 90mm Lens. Hight 90mm. Base 130mm |
 |
$ 60.50 | $55.00 |
| Driving
light - pair - 12V 55W H3 Hyper bulb - Dichroic halogen lamp system - Light weight - H 170mm W 170mm D 115mm |
 |
$ 66.00 | $ 60.00 |
| Mini
Fog Lamp - Ideal for cockpit light or light duty lighting - 12V 35W Halogen globe - H 52mm L 52mm |
 |
$ 23.10 | $ 21.00 |
| Spot
light. ABS plastic construction. - 12V 55W - 100mm lens - 10m cord with cigarette lighter plug |
 |
$ 44.00 | $ 40.00 |
|
Navigation lights. Pair. - 12V |
 |
$ 38.50 | $ 35.00 |
|
Navigation light. Single all round white - 12V |
 |
$ 19.80 | $ 18.00 |
| Assorted hull fittings and fasteners | Inc GST | Ex GST | |
| Gunwale (black PVC) |
 |
$ 14.85 per mtr | $13.50 per mtr |
|
Large plastic bungs - Suits 32mm hole |
 |
$ 5.28 | $ 4.80 |
| Plastic cleat (150mm) |
 |
$ 5.50 | $ 5.00 |
| Tow hook (S/S U bolt) |
 |
$ 14.30 | $13.00 |
| Windshield (small) |
 |
$143.00 | $130.00 |
| Windshield (Large - New Viper 5 style) | $374.00 | $340.00 | |
| Engine cover (specify model) |
 |
$418.00 | $380.00 |
| Seat covers (Cruiser and all Viper 4 range) | $ 88.00 | $ 80.00 | |
| Seat covers (Viper 5 range) | $110.00 | $ 100.00 | |
| Seat foam (Cruiser and all Viper 4 range) |
 |
$120.00 | $110.00 |
| Rawl nut 13mm x M6 (new improved type) |
 |
$ 0.44 | $0.40 |
| Rawl nut 10mm x M5 (new improved type) |
 |
$ 0.33 | $0.30 |
| Rear compartment hatch (Viper 5 only) |
 |
$ 55.00 | $0.40 |
| Inspection hatch (5" round) |
 |
$ 13.20 | $12.00 |
| Grab Rail. S/S 9" | $ 13.75 | $ 12.50 | |
| Grab Rail S/S 24" | $ 19.80 | $ 18.00 | |
| Compartment Vent |
 |
$ 6.60 | $ 6.00 |
| Unique Viper Cruiser Parts | Inc GST | Ex GST | |
| Air deflector | $ 66.00 | $60.00 | |
| Engine bay floor mounts | $ 132.00 | $120.00 | |
| Skirt hook set |
 |
$ 49.50 | $45.00 |
| Specials on Viper Cruiser parts, download PDF file here | |||
| Fibreglass Fabrics and glue | Inc GST | Ex GST | |
| 4oz (130gsm) Plain weave Aerialite cloth. 686mm wide |
 |
$ 3.30 per l/m | $3.00 per l/m |
| 200gsm 3K Carbon Fibre twill weave 1.m wide (limited stock) |
 |
$ 44.00 per l/m | $40.00 per l/m |
| 485gsm KEVLAR Plain weave. 1.5m wide (ballistics grade) |
 |
$ 42.90 per l/m | $39.00 per l/m |
| Sikaflex 291 |
 |
$ 22.00 | $ 20.00 |
Note: Spare parts
are only available to Viper Hovercraft owners and plan/kit owners. Please allow for
freight costs on all items
P.O.A. = Price determined on oder. Please
email for
current price on items so marked.
Prices may change without notice
©
2009. VIPER HOVERCRAFT
A Division of NELL FABRICATION
288 Princess Hwy, South Nowra .N.S.W. 2541
ABN - 94 641 031 510
Office: PO Box 111, Huskisson N.S.W.
2540 AUSTRALIA Ph/fax: 02 44418614 Mob: 041864935
